IDS peak 2.10.0 / uEye+ firmware 3.34

Zoom window out
Larger text | Smaller text
Hide page header
Show expanding text
Print topic
Send mail feedback
Copy topic URL

Navigation: B: Operation of uEye+ cameras > Model-specific hints > U3-31Lx

Application notes U3-31Lx

IDS Peak comfortSDK, genericSDK, IPL, and AFL developer manuals are external documents. Please contact us if you need them.

ROI

•The frame rate does not increase by the use of a horizontal ROI.

•When you use binning or decimation in combination with the maximum ROI or an X/Y offset, error messages or image errors occur with the following pixel formats:

oColor cameras: BayerGB12p, BayerGB12, RGB10p32, BGR10p32

oMonochrome cameras: Mono12p, Mono12

Workaround: Do not use a maximum ROI or X/Y offset with these pixel formats if you want to use binning or decimation.

Binning

•Sensor binning is only supported by monochrome sensors.

Decimation

•The model only supports FPGA decimation and no sensor decimation.

•The frame rate does not increase with decimation.

•Color sensors support decimation only with 10-bit pixel formats.

Pixel format

•Due to the manufacturer, the minimum and maximum pixel values are not used for the sensor pixel formats. For example, in a 12-bit pixel format, only the value 4094 is reached for saturation, but not 4095.

Please enable JavaScript to view this site.

IDS peak 2.10.0 / uEye+ firmware 3.34