Please enable JavaScript to view this site.

IDS peak 2.10.0 / uEye+ firmware 3.34

IDS Peak comfortSDK, genericSDK, IPL, and AFL developer manuals are external documents. Please contact us if you need them.

ROI

The frame rate does not increase by the use of a horizontal ROI.

It is possible to set a maximum ROI that is larger than the default ROI. The default ROI is the recommended ROI size of the sensor manufacturer. The offset of the default ROI is such that the ROI is centered. The maximum ROI includes all usable pixels. This can be used e.g. for debayering without special edge processing with recommended default ROI. To set the maximum ROI

1.Set the default ROI.

2.Decrease the offset.

3.Then increase the height and width of the ROI.

Binning

Sensor binning is only supported by monochrome sensors.

Line scan

The model does not support line scan.

Black level

Only deactivate the sensor's own automatic black level control if you carefully evaluate the camera's operation afterwards, as this may cause deviating image quality. It is recommended to use the sensor's own black level control.

Pixel format

Due to the manufacturer, the minimum and maximum pixel values are not used for the sensor pixel formats. For example, in a 12-bit pixel format, only the value 4094 is reached for saturation, but not 4095.

Power consumption

The power consumption may exceed the usual USB 3 values. It is possible that the camera cannot be operated on every system. If necessary, the frame rate can be reduced.

USB 2.0 operation

The camera model does not support USB 2.0 operation.

© 2024 IDS Imaging Development Systems GmbH