IDS peak 2.15.0 / uEye+ firmware 3.50

IDS Peak comfortSDK, genericSDK, IPL, and AFL developer manuals are external documents. Please contact us if you need them.

The UART functionality is only available for cameras that support UART communication on the hardware. This feature is only supported by the following uEye+ cameras.

•USB 3 uEye+ XCP Rev. 1.2

•USB 3 uEye+ XLE Rev. 1.2

•USB 3 uEye+ XLS Rev. 1.2

The hardware must be Rev. 1.2 (or higher), as UART support is included from this hardware on. The description of the GPIO (General Purpose I/O) can be found in the camera manual of the respective camera family.

Event identifier whose value uniquely defines an event, that is generated when UartRxStatus has changed. The identifier can be used to program a callback function that is informed about the occurrence of the event.