IDS peak 2.20.0 / uEye+ firmware 3.80
IDS Peak comfortSDK, genericSDK, AFL, ICL, and IPL developer manuals are external documents.
Please contact us if you need these manuals.
Specifies the interval at which the host sends data to the device to prevent that a firewall blocks the communication on the stream channel. If GevStreamChannelSenderInterval is set to 0, no data is sent to the device periodically.
Name |
GevStreamChannelSenderInterval |
Category |
|
Interface |
Integer |
Access |
Read/Write |
Unit |
- |
Visibility |
Expert |
Values |
0 …4294967295 Increment: 100 Default: 5000 |
Standard |
IDS |
Availability uEye+ |
|
Availability uEye |
- |
Code Example
C++
// Determine the current GevStreamChannelSenderInterval
int64_t value = nodeMapDataStream->FindNode<peak::core::nodes::IntegerNode>("GevStreamChannelSenderInterval")->Value();
// Set GevStreamChannelSenderInterval to 5000 ms
nodeMapDataStream->FindNode<peak::core::nodes::IntegerNode>("GevStreamChannelSenderInterval")->SetValue(5000);
C#
// Determine the current GevStreamChannelSenderInterval
long value = nodeMapDataStream.FindNode<IDSImaging.Peak.API.Core.Nodes.IntegerNode>("GevStreamChannelSenderInterval").Value();
// Set GevStreamChannelSenderInterval to 5000 ms
nodeMapDataStream.FindNode<IDSImaging.Peak.API.Core.Nodes.IntegerNode>("GevStreamChannelSenderInterval").SetValue(5000);
Python
# Determine the current GevStreamChannelSenderInterval (int)
value = nodeMapDataStream.FindNode("GevStreamChannelSenderInterval").Value()
# Set GevStreamChannelSenderInterval to 5000 ms (int)
nodeMapDataStream.FindNode("GevStreamChannelSenderInterval").SetValue(5000)
