IDS peak 2.10.0 / uEye+ firmware 3.34

IDS Peak comfortSDK, genericSDK, IPL, and AFL developer manuals are external documents. Please contact us if you need them.

Defines the event of which the number of occurrences should be displayed in PtpStatisticsValue.

Values description

•SynchronizationCounter: The camera changes its state to "uncalibrated" and begins the synchronization to a master.

•SynchronizationUnreliableCounter: Messages from the master are received but the slave can not minimize the offset from master below 10 ms.

•InternalSynchronizationFailedCounter: The FPGA was not able to synchronize its time to the one of the PHY.

•InternalSynchronizationLostCounter: The time difference between FPGA and PHY was above 100 ms.

•EthernetLinkLostCounter: The Ethernet link was lost.

•PhyPtpEnableErrorCounter: PHY timestamp does not work after enabling PTP.

•PhyReceptionErrorCounter: There was a PHY internal issue receiving a PTP message.

•PhyCarrierDataCounter: There was a PHY internal issue.

Code example

C++

// Determine the current entry of PtpStatisticsSelector
std::string value = nodeMapRemoteDevice->FindNode<peak::core::nodes::EnumerationNode>("PtpStatisticsSelector")->CurrentEntry()->SymbolicValue();
// Get a list of all available entries of PtpStatisticsSelector
auto allEntries = nodeMapRemoteDevice->FindNode<peak::core::nodes::EnumerationNode>("PtpStatisticsSelector")->Entries();
std::vector<std::shared_ptr<peak::core::nodes::EnumerationEntryNode>> availableEntries;
for(const auto & entry : allEntries)
{
  if ((entry->AccessStatus()!=peak::core::nodes::NodeAccessStatus::NotAvailable)
          && (entry->AccessStatus()!=peak::core::nodes::NodeAccessStatus::NotImplemented))
  {
      availableEntries.emplace_back(entry);
  }
}
// Set PtpStatisticsSelector to "SynchronizationCounter"
nodeMapRemoteDevice->FindNode<peak::core::nodes::EnumerationNode>("PtpStatisticsSelector")->SetCurrentEntry("SynchronizationCounter");

C#

// Determine the current entry of PtpStatisticsSelector
string value = nodeMapRemoteDevice.FindNode<peak.core.nodes.EnumerationNode>("PtpStatisticsSelector").CurrentEntry().SymbolicValue();
// Get a list of all available entries of PtpStatisticsSelector
allEntries = nodeMapRemoteDevice.FindNode<peak.core.nodes.EnumerationNode>("PtpStatisticsSelector").Entries();
List<string> availableEntries = new List<string>();
for(int i = 0; i < allEntries.Count(); ++i)
{
  if ((allEntries[i].AccessStatus() != peak.core.nodes.NodeAccessStatus.NotAvailable)
          && (allEntries[i].AccessStatus() != peak.core.nodes.NodeAccessStatus.NotImplemented))
  {
      availableEntries.Add(allEntries[i].SymbolicValue());
  }
}
// Set PtpStatisticsSelector to "SynchronizationCounter"
nodeMapRemoteDevice.FindNode<peak.core.nodes.EnumerationNode>("PtpStatisticsSelector").SetCurrentEntry("SynchronizationCounter");

Python

# Determine the current entry of PtpStatisticsSelector (str)
value = nodeMapRemoteDevice.FindNode("PtpStatisticsSelector").CurrentEntry().SymbolicValue()
# Get a list of all available entries of PtpStatisticsSelector
allEntries = nodeMapRemoteDevice.FindNode("PtpStatisticsSelector").Entries()
availableEntries = []
for entry in allEntries:
  if (entry.AccessStatus() != ids_peak.NodeAccessStatus_NotAvailable
          and entry.AccessStatus() != ids_peak.NodeAccessStatus_NotImplemented):
      availableEntries.append(entry.SymbolicValue())
 
# Set PtpStatisticsSelector to "SynchronizationCounter" (str)
nodeMapRemoteDevice.FindNode("PtpStatisticsSelector").SetCurrentEntry("SynchronizationCounter")