IDS peak 2.10.0 / uEye+ firmware 3.34

IDS Peak comfortSDK, genericSDK, IPL, and AFL developer manuals are external documents. Please contact us if you need them.

Freerun mode: The camera could neither process nor output an image captured by the sensor.

Hardware trigger mode: The camera received a hardware trigger signal which could not be processed because the sensor was still busy.

Possible cause/remedy: The camera's frame rate is too high or the bandwidth on the network is insufficient to transfer the image

•Check the host performance (see uEye Cockpit: Performance overview or uEye Demo: Performance information).

•Reduce the frame rate

•GigE uEye cameras: Increase the value for the receive descriptors in the network card settings