IDS peak 2.15.0 / uEye+ firmware 3.50

IDS Peak comfortSDK, genericSDK, IPL, and AFL developer manuals are external documents. Please contact us if you need them.

The UART functionality is only available for cameras that support UART communication on the hardware. This feature is only supported by the following uEye+ cameras.

•USB 3 uEye+ XCP Rev. 1.2

•USB 3 uEye+ XLE Rev. 1.2

•USB 3 uEye+ XLS Rev. 1.2

The hardware must be Rev. 1.2 (or higher), as UART support is included from this hardware on. The description of the GPIO (General Purpose I/O) can be found in the camera manual of the respective camera family.

Data to be sent to the UART. You specify the length of the data to be sent in UartTxDataLength. Note that writing data that is shorter than the previous data does not delete the remaining part of the register.