IDS Software Suite 4.96.1
Camera timing |
|
USB uEye SE |
GigE uEye SE/RE PoE |
Pixel clock range*1 |
MHz |
10 – 41 |
10 – 58 |
Frame rate freerun mode*2 |
fps |
71 |
100 |
Frame rate trigger mode (max.)*2 |
fps |
71 |
100 |
Exposure (min.*2 – max.*3) |
ms |
0.018 – 120 000 |
0.018 – 120 000 |
AOI |
|
|
|
Mode*4 |
|
Horizontal + vertical |
Horizontal + vertical |
AOI image width / step width |
pixels |
16 – 768 / 4 |
16 – 768 / 4 |
Mono: AOI image height / step width |
pixels |
120 – 576 / 1 |
120 – 576 / 1 |
Color: AOI image height / step width |
pixels |
120 – 576 / 2 |
120 – 576 / 2 |
Mono: AOI position grid horizontal / vertical |
pixels |
1 / 1 |
1 / 1 |
Color: AOI position grid horizontal / vertical |
pixels |
2 / 2 |
2 / 2 |
Binning |
|
|
|
Mode*4 |
|
Horizontal + vertical |
Horizontal + vertical |
Method |
|
H + V: monochrome binning, additive |
H + V: monochrome binning, additive |
Factor |
|
2x, 3x, 4x |
2x, 3x, 4x |
Subsampling |
|
|
|
Mode |
|
- |
- |
Method |
|
- |
- |
Factor |
|
- |
- |
Hardware trigger |
|
|
|
Mode |
|
Asynchronous |
Asynchronous |
Adjustable trigger delay |
µs |
15 – 4 000 000 |
15 – 4 000 000 |
Power consumption |
|
|
|
Power consumption (min, max)*5 |
W |
1.1 – 1.9 |
n.a. |
*1 The maximum possible pixel clock frequency depends on the PC hardware used. Depending on camera model and operating mode, the relationship between pixel clock and exposure time must be considered.
*2 Requires maximum pixel clock frequency. Depending on camera model and operating mode, the relationship between frame rate and exposure time must be considered.
*3 Requires minimum pixel clock frequency. Depending on camera model and operating mode, the relationship between frame rate and exposure time must be considered.
*4 Use of this function increases the frame rate.
*5 The power consumption depends on the sensor model and the pixel clock setting.
*6 Values are valid for operation with 12 V external power supply without Power-over-Ethernet.
