IDS Software Suite 4.96.1
Camera timing |
|
USB uEye SE |
GigE uEye SE/RE PoE |
Pixel clock range*1 |
MHz |
10 – 43 |
10 – 56 |
Frame rate freerun mode*2 |
fps |
6.5 |
8.5 |
Frame rate trigger mode (max.)*2 |
fps |
6.5 |
8.5 |
Exposure time (min.*2 – max.*3) |
ms |
0.038 – 60 000 |
0.029 – 60 000 |
AOI |
|
|
|
Mode |
|
Horizontal + vertical*4 |
Horizontal + vertical*4 |
AOI image width / step width |
pixels |
16 – 2448 / 4 |
16 – 2448 / 4 |
AOI image height / step width |
pixels |
240 – 2048 / 2 |
240 – 2048 / 2 |
Mono. AOI pooition grid horizontal / vertical |
pixels |
1 / 1 |
1 / 1 |
Color: AOI position grid horizontal / vertical |
pixels |
4 / 2 |
4 / 2 |
Binning |
|
|
|
Mode |
|
Horizontal + vertical*4 |
Horizontal + vertical*4 |
Method |
|
H + V: monochrome binning, additive |
H + V: monochrome binning, additive |
Factor |
|
2x, 3x, 4x |
2x, 3x, 4x |
Subsampling |
|
|
|
Mode |
|
- |
- |
Method |
|
- |
- |
Factor |
|
- |
- |
Hardware trigger |
|
|
|
Mode |
|
Asynchronous |
Asynchronous |
Adjustable trigger delay |
µs |
15 – 4 000 000 |
15 – 4 000 000 |
Power consumption |
|
|
|
Power consumption (min, max)*5 |
W |
1.3 – 2.4 |
2.9 – 4.7*6 GigE uEye RE PoE: 3.8 – 3.9 |
*1 The maximum possible pixel clock frequency depends on the PC hardware used. Depending on camera model and operating mode, the relationship between pixel clock and exposure time must be considered.
*2 Requires maximum pixel clock frequency. Depending on camera model and operating mode, the relationship between frame rate and exposure time must be considered.
*3 Requires minimum pixel clock frequency. Depending on camera model and operating mode, the relationship between frame rate and exposure time must be considered.
*4 Use of this function increases the frame rate.
*5 The power consumption depends on the sensor model and the pixel clock setting.
*6 Values are valid for operation with 12 V external power supply without Power-over-Ethernet.
