IDS Software Suite 4.96.1
Camera timing |
|
uEye SE USB 3.1 Gen 1 |
GigE uEye FA Rev. 1.0 / Rev. 1.2 |
GigE uEye SE Rev. 4 / Rev. 4.2 |
Pixel clock range*1 |
MHz |
99 – 395 |
99 – 140 |
99 – 140 |
Frame rate freerun mode*2 |
fps |
33 |
12 |
12 |
Frame rate trigger mode (continuous)*2 |
fps |
33 |
12 |
12 |
Frame rate trigger mode (max.)*2 |
fps |
33 |
12 |
12 |
Exposure time (min.*2 – max.*3) |
ms |
0.027 – 1 000 |
0.047 – 1 000 |
0.047 – 1 000 |
Long exposure (max.) |
ms |
30 000 |
30 000 |
30 000 |
AOI |
|
|
|
|
Mode |
|
Horizontal + vertical*4 |
Horizontal + vertical*4 |
Horizontal + vertical*4 |
AOI image width / step width |
pixels |
256 – 4104/ 8 |
256 – 4104/ 8 |
256 – 4104/ 8 |
AOI image height / step width |
pixels |
2 – 2174 / 2 |
2 – 2174 / 2 |
2 – 2174 / 2 |
AOI position grid, horizontal / vertical |
pixels |
8 / 2 |
8 / 2 |
8 / 2 |
Binning |
|
|
|
|
Mode |
|
Horizontal +vertical |
Monochrome: Horizontal + vertical*4 |
Monochrome: Horizontal + vertical*4 |
Method |
|
Monochrome/color: automatic, additive |
Monochrome: monochrome binning, additive |
Monochrome: monochrome binning, additive |
Factor |
|
2x |
Monochrome: 2x |
Monochrome: 2x |
Subsampling |
|
|
|
|
Mode |
|
Horizontal + vertical |
Horizontal + vertical |
Horizontal + vertical |
Method |
|
Monochrome/color: automatic |
Monochrome/color: automatic |
Monochrome/color: automatic |
Factor |
|
2x, 4x, 6x, 8x, 16x |
2x, 4x, 6x, 8x, 16x |
2x, 4x, 6x, 8x, 16x |
Hardware trigger |
|
|
|
|
Mode |
|
Asynchronous |
Asynchronous |
Asynchronous |
Adjustable trigger delay |
µs |
15 – 4 000 000 |
15 – 4 000 000 |
15 – 4 000 000 |
Power consumption |
|
|
|
|
Power consumption (min, max)*5 |
W |
1.6 – 3.7 |
12 V: 1.6 – 3.1 24 V: 1.7 – 3.1 PoE (44 V): 2.6 – 4.1 PoE (56 V): 3.7 – 4.5 |
12 V: 1.6 – 3.1 24 V: 1.7 – 3.1 PoE (44 V): 2.6 – 4.1 PoE (56 V): 3.7 – 4.5 |
*1 The maximum possible pixel clock frequency depends on the PC hardware used. Depending on camera model and operating mode, the relationship between pixel clock and exposure time must be considered.
*2 Requires maximum pixel clock frequency. Depending on camera model and operating mode, the relationship between frame rate and exposure time must be considered.
*3 Requires minimum pixel clock frequency. Depending on camera model and operating mode, the relationship between frame rate and exposure time must be considered.
*4 Use of this function increases the frame rate.
*5 The power consumption depends on the sensor model and the pixel clock setting.
