|
Camera specifications |
---|---|
Design |
|
Housing/board level |
+/+ |
Dimensions height x width x depth |
Housing version: 34 x 44 x 47 mm PCB version: 31.5 x 40 x 30 mm PCB version with C-mount: 34 x 44 x 35 mm |
IP code housing version |
IP 30 •Protection against the ingression of small particles (diameter ≥ 2.5 mm) •No protection against water |
IP code PCB version |
IP 00 •No protection against the ingression of particles •No protection against water |
Lens mount |
C-mount, see Optical specifications GigE uEye SE Rev. 4 |
Mounting holes bottom/top/side/front |
4/0/0/0 |
Thread diameter |
M3 |
Status LED |
|
Ambient conditions |
|
Connectors |
|
Interface connector |
GigE RJ45, housing version: screwable |
Power supply |
PoE or 12-24 V external |
I/O connector |
8-pin Hirose HR25, screwable |
Optocoupler for I/O |
1/1 |
Trigger input/Flash output/GPIO |
1/1/2 |
PWM (pulse-width modulation) |
+ |
Serial interface |
- |
TWI (Two Wire Interface) |
- |
Special features |
Power supply with Power-over-Ethernet |
Image memory (approximately) |
128 MB |