IDS Software Suite 4.96.1
 |
 |
|---|---|
USB 2.0 USB 3.x GigE |
USB 2.0 USB 3.x GigE |
Syntax
INT is_DeviceFeature (HIDS hCam, UINT nCommand, void* pParam, UINT cbSizeOfParam)
Description
Using is_DeviceFeature() you can configure special camera functions provided by specific uEye models:
•Activate the I2C stop bit between the write and read command.
|
I2C functions are only supported by the following PCB versions: •uEye LE USB 3.1 Gen 1 •USB 3 uEye LE •USB uEye LE •GigE uEye LE. |
The nCommand input parameter is used to select the function mode. The pParam input parameter depends on the selected function mode. If you select functions for setting or returning a value, pParam contains a pointer to a variable of the UINT type. The size of the memory area to which pParam refers is specified in the cbSizeOfParam input parameter.
Input parameters
hCam |
Camera handle |
pParam |
Pointer to a function parameter, whose function depends on nCommand. |
cbSizeOfParam |
Size (in bytes) of the memory area to which pParam refers. |
Status flags from DEVICE_FEATURE_MODE_CAPS
IS_DEVICE_FEATURE_CAP_REPEATED_START_CONDITION_I2C |
Enabling/disabling the I2C stop bit for the read command is supported. |
Related functions
