USB 2.0 USB 3.x GigE |
USB 2.0 USB 3.x GigE |
Syntax
INT is_ResetToDefault (HIDS hCam)
Description
is_ResetToDefault() resets all parameters to the camera-specific defaults as specified by the driver. By default, the camera uses full resolution, a medium speed and color level gain values adapted to daylight exposure.
When you call is_ResetToDefault() the color format is also reset. Therefore, release already allocated image memory with is_FreeImageMem(). Re-allocated the image memory with is_AllocImageMem() and the correct color format before you restart image acquisition.
Input parameters
hCam |
Camera handle |
Return values
IS_CANT_ADD_TO_SEQUENCE |
The image memory is already included in the sequence and cannot be added again. |
IS_CANT_COMMUNICATE_WITH_DRIVER |
Communication with the driver failed because no driver has been loaded. |
IS_CANT_OPEN_DEVICE |
An attempt to initialize or select the camera failed (no camera connected or initialization error). |
IS_DR_CANNOT_CREATE_SURFACE |
The image surface or overlay surface could not be created. |
IS_DR_CANNOT_CREATE_TEXTURE |
The texture could not be created. |
IS_DR_CANNOT_CREATE_VERTEX_BUFFER |
The vertex buffer could not be created. |
IS_DR_DEVICE_OUT_OF_MEMORY |
Not enough graphics memory available. |
IS_DR_LIBRARY_NOT_FOUND |
The DirectRenderer library could not be found. |
IS_INVALID_CAMERA_TYPE |
The camera type defined in the .ini file does not match the current camera model. |
IS_INVALID_CAPTURE_MODE |
The function can not be executed in the current camera operating mode (free run, trigger or standby). |
IS_INVALID_CAMERA_HANDLE |
Invalid camera handle |
IS_INVALID_MEMORY_POINTER |
Invalid pointer or invalid memory ID |
IS_INVALID_PARAMETER |
One of the submitted parameters is outside the valid range or is not supported for this sensor or is not available in this mode. |
IS_IO_REQUEST_FAILED |
An IO request from the uEye driver failed. Possibly the versions of the ueye_api.dll (API) and the driver file (ueye_usb.sys or ueye_eth.sys) do not match. |
IS_NO_SUCCESS |
General error message |
IS_NOT_CALIBRATED |
The camera does not contain any calibration data. |
IS_NOT_SUPPORTED |
The camera model used here does not support this function or setting. |
IS_NULL_POINTER |
Invalid array |
IS_OUT_OF_MEMORY |
No memory could be allocated. |
IS_SEQUENCE_BUF_ALREADY_LOCKED |
The memory could not be locked. The pointer to the buffer is invalid. |
IS_SUCCESS |
Function executed successfully |
IS_TIMED_OUT |
A timeout occurred. An image capturing process could not be terminated within the allowable period. |
Related functions