USB 2.0 USB 3.x GigE |
USB 2.0 USB 3.x GigE |
Syntax
INT is_SetCameraID (HIDS hCam, INT nID)
Description
Using is_SetCameraID(), you can assign a unique camera ID to a camera. Thus, it is possible to access the camera directly with the is_InitCamera() function.
The camera ID is stored in the non-volatile memory of the camera. The factory default camera ID is 1. The camera ID can also be changed in the IDS Camera Manager.
Note for GigE uEye cameras The change of the camera ID only has an effect on the boot boost mode after reconnecting the camera. If you add a camera to the boot boost list by changing the camera ID, the camera must not be open. |
Input parameters
hCam |
Camera handle |
Return values
When used together with IS_GET_CAMERA_ID |
Current ID |
IS_CANT_COMMUNICATE_WITH_DRIVER |
Communication with the driver failed because no driver has been loaded. |
IS_CANT_OPEN_DEVICE |
An attempt to initialize or select the camera failed (no camera connected or initialization error). |
IS_INVALID_CAMERA_TYPE |
The camera type defined in the .ini file does not match the current camera model. |
IS_INVALID_CAMERA_HANDLE |
Invalid camera handle |
IS_INVALID_MODE |
Camera is in standby mode, function not allowed |
IS_INVALID_PARAMETER |
One of the submitted parameters is outside the valid range or is not supported for this sensor or is not available in this mode. |
IS_IO_REQUEST_FAILED |
An IO request from the uEye driver failed. Possibly the versions of the ueye_api.dll (API) and the driver file (ueye_usb.sys or ueye_eth.sys) do not match. |
IS_NO_SUCCESS |
General error message |
IS_NOT_CALIBRATED |
The camera does not contain any calibration data. |
IS_NOT_SUPPORTED |
The camera model used here does not support this function or setting. |
IS_NULL_POINTER |
Invalid array |
IS_SUCCESS |
Function executed successfully |
IS_TIMED_OUT |
A timeout occurred. An image capturing process could not be terminated within the allowable period. |
Related functions