No |
Error |
Description |
---|---|---|
-1 |
IS_NO_SUCCESS |
General error message |
0 |
IS_SUCCESS |
Function executed successfully |
1 |
IS_INVALID_CAMERA_HANDLE |
Invalid camera handle Most of the uEye SDK functions expect the camera handle as the first parameter. |
2 |
IS_IO_REQUEST_FAILED |
An IO request from the uEye driver failed. Possibly the versions of the ueye_api.dll (API) and the driver file (ueye_usb.sys or ueye_eth.sys) do not match. |
3 |
IS_CANT_OPEN_DEVICE |
An attempt to initialize or select the camera failed (no camera connected or initialization error). |
11 |
IS_CANT_OPEN_REGISTRY |
Error opening a Windows registry key |
12 |
IS_CANT_READ_REGISTRY |
Error reading settings from the Windows registry |
15 |
IS_NO_IMAGE_MEM_ALLOCATED |
The driver could not allocate memory. |
16 |
IS_CANT_CLEANUP_MEMORY |
The driver could not release the allocated memory. |
17 |
IS_CANT_COMMUNICATE_WITH_DRIVER |
Communication with the driver failed because no driver has been loaded. |
18 |
IS_FUNCTION_NOT_SUPPORTED_YET |
The function is not supported yet. |
30 |
IS_INVALID_IMAGE_SIZE |
Invalid image size |
32 |
IS_INVALID_CAPTURE_MODE |
The function can not be executed in the current camera operating mode (free run, trigger or standby). |
49 |
IS_INVALID_MEMORY_POINTER |
Invalid pointer or invalid memory ID |
50 |
IS_FILE_WRITE_OPEN_ERROR |
File cannot be opened for writing or reading. |
51 |
IS_FILE_READ_OPEN_ERROR |
The file cannot be opened. |
52 |
IS_FILE_READ_INVALID_BMP_ID |
The specified file is not a valid bitmap file. |
53 |
IS_FILE_READ_INVALID_BMP_SIZE |
The bitmap size is not correct (bitmap too large). |
108 |
IS_NO_ACTIVE_IMG_MEM |
No active image memory available. You must set the memory to active using the is_SetImageMem() function or create a sequence using the is_AddToSequence() function. |
112 |
IS_SEQUENCE_LIST_EMPTY |
The sequence list is empty and cannot be deleted. |
113 |
IS_CANT_ADD_TO_SEQUENCE |
The image memory is already included in the sequence and cannot be added again. |
117 |
IS_SEQUENCE_BUF_ALREADY_LOCKED |
The memory could not be locked. The pointer to the buffer is invalid. |
118 |
IS_INVALID_DEVICE_ID |
The device ID is invalid. Valid IDs start from 1 for USB cameras, and from 1001 for GigE cameras. |
119 |
IS_INVALID_BOARD_ID |
The board ID is invalid. Valid IDs range from 1 through 255. |
120 |
IS_ALL_DEVICES_BUSY |
All cameras are in use. |
122 |
IS_TIMED_OUT |
A timeout occurred. An image capturing process could not be terminated within the allowable period. |
123 |
IS_NULL_POINTER |
Invalid array |
125 |
IS_INVALID_PARAMETER |
One of the submitted parameters is outside the valid range or is not supported for this sensor or is not available in this mode. |
127 |
IS_OUT_OF_MEMORY |
No memory could be allocated. |
129 |
IS_ACCESS_VIOLATION |
An access violation has occurred. |
139 |
IS_NO_USB20 |
The camera is connected to a port which does not support the USB 2.0 high-speed standard. Cameras without a memory board cannot be operated on a USB 1.1 port. |
140 |
IS_CAPTURE_RUNNING |
A capturing operation is in progress and must be terminated first. |
145 |
IS_IMAGE_NOT_PRESENT |
The requested image is not available in the camera memory or is no longer valid. |
148 |
IS_TRIGGER_ACTIVATED |
The function cannot be used because the camera is waiting for a trigger signal. |
151 |
IS_CRC_ERROR |
A CRC error-correction problem occurred while reading the settings. |
152 |
IS_NOT_YET_RELEASED |
This function has not been enabled yet in this version. |
153 |
IS_NOT_CALIBRATED |
The camera does not contain any calibration data. |
154 |
IS_WAITING_FOR_KERNEL |
The system is waiting for the kernel driver to respond. |
155 |
IS_NOT_SUPPORTED |
The camera model used here does not support this function or setting. |
156 |
IS_TRIGGER_NOT_ACTIVATED |
The function is not possible as trigger is disabled. |
157 |
IS_OPERATION_ABORTED |
The operation was cancelled. |
158 |
IS_BAD_STRUCTURE_SIZE |
An internal structure has an incorrect size. |
159 |
IS_INVALID_BUFFER_SIZE |
The image memory has an inappropriate size to store the image in the desired format. |
160 |
IS_INVALID_PIXEL_CLOCK |
This setting is not available for the currently set pixel clock frequency. |
161 |
IS_INVALID_EXPOSURE_TIME |
This setting is not available for the currently set exposure time. |
162 |
IS_AUTO_EXPOSURE_RUNNING |
This setting cannot be changed while automatic exposure time control is enabled. |
163 |
IS_CANNOT_CREATE_BB_SURF |
The BackBuffer surface cannot be created. |
164 |
IS_CANNOT_CREATE_BB_MIX |
The BackBuffer mix surface cannot be created. |
165 |
IS_BB_OVLMEM_NULL |
The BackBuffer overlay memory cannot be locked. |
166 |
IS_CANNOT_CREATE_BB_OVL |
The BackBuffer overlay memory cannot be created. |
167 |
IS_NOT_SUPP_IN_OVL_SURF_MODE |
Not supported in BackBuffer Overlay mode. |
168 |
IS_INVALID_SURFACE |
Back buffer surface invalid. |
169 |
IS_SURFACE_LOST |
Back buffer surface not found. |
170 |
IS_RELEASE_BB_OVL_DC |
Error releasing the overlay device context. |
171 |
IS_BB_TIMER_NOT_CREATED |
The back buffer timer could not be created. |
172 |
IS_BB_OVL_NOT_EN |
The back buffer overlay was not enabled. |
173 |
IS_ONLY_IN_BB_MODE |
Only possible in BackBuffer mode. |
174 |
IS_INVALID_COLOR_FORMAT |
Invalid color format |
175 |
IS_INVALID_WB_BINNING_MODE |
Mono binning/mono sub-sampling do not support automatic white balance. |
176 |
IS_INVALID_I2C_DEVICE_ADDRESS |
Invalid I2C device address |
177 |
IS_COULD_NOT_CONVERT |
The current image could not be processed. |
178 |
IS_TRANSFER_ERROR |
Transfer error. Frequent transfer errors can mostly be avoided by reducing the pixel rate. |
179 |
IS_PARAMETER_SET_NOT_PRESENT |
Parameter set is not present. |
180 |
IS_INVALID_CAMERA_TYPE |
The camera type defined in the .ini file does not match the current camera model. |
181 |
IS_INVALID_HOST_IP_HIBYTE |
Invalid HIBYTE of host address |
182 |
IS_CM_NOT_SUPP_IN_CURR_DISPLAYMODE |
The color mode is not supported in the current display mode. |
183 |
IS_NO_IR_FILTER |
No IR filter available |
184 |
IS_STARTER_FW_UPLOAD_NEEDED |
The camera's starter firmware is not compatible with the driver and needs to be updated. |
185 |
IS_DR_LIBRARY_NOT_FOUND |
The DirectRenderer library could not be found. |
186 |
IS_DR_DEVICE_OUT_OF_MEMORY |
Not enough graphics memory available. |
187 |
IS_DR_CANNOT_CREATE_SURFACE |
The image surface or overlay surface could not be created. |
188 |
IS_DR_CANNOT_CREATE_VERTEX_BUFFER |
The vertex buffer could not be created. |
189 |
IS_DR_CANNOT_CREATE_TEXTURE |
The texture could not be created. |
190 |
IS_DR_CANNOT_LOCK_OVERLAY_SURFACE |
The overlay surface could not be locked. |
191 |
IS_DR_CANNOT_UNLOCK_OVERLAY_SURFACE |
The overlay surface could not be unlocked. |
192 |
IS_DR_CANNOT_GET_OVERLAY_DC |
Could not get the device context handle for the overlay. |
193 |
IS_DR_CANNOT_RELEASE_OVERLAY_DC |
Could not release the device context handle for the overlay. |
194 |
IS_DR_DEVICE_CAPS_INSUFFICIENT |
Function is not supported by the graphics hardware. |
195 |
IS_INCOMPATIBLE_SETTING |
Because of other incompatible settings the function is not possible. |
196 |
IS_DR_NOT_ALLOWED_WHILE_DC_IS_ACTIVE |
A device context handle is still open in the application. |
197 |
IS_DEVICE_ALREADY_PAIRED |
The device is already in use by the system or is being used by another system. (Camera was opened and paired to a device). |
198 |
IS_SUBNETMASK_MISMATCH |
The subnet mask of the camera and PC network card are different. |
199 |
IS_SUBNET_MISMATCH |
The subnet of the camera and PC network card are different. |
200 |
IS_INVALID_IP_CONFIGURATION |
The configuration of the IP address is invalid. |
201 |
IS_DEVICE_NOT_COMPATIBLE |
The device is not compatible to the drivers. |
202 |
IS_NETWORK_FRAME_SIZE_INCOMPATIBLE |
The settings for the image size of the camera are not compatible to the PC network card. |
203 |
IS_NETWORK_CONFIGURATION_INVALID |
The configuration of the network card is invalid. |
204 |
IS_ERROR_CPU_IDLE_STATES_CONFIGURATION |
The configuration of the CPU idle has failed. |
205 |
IS_DEVICE_BUSY |
The camera is busy and cannot transfer the requested image. |
206 |
IS_SENSOR_INITIALIZATION_FAILED |
The initialization of the sensor failed. |
207 |
IS_IMAGE_BUFFER_NOT_DWORD_ALIGNED |
The image buffer is not DWORD aligned. |
208 |
IS_SEQ_BUFFER_IS_LOCKED |
The image memory is locked. |
209 |
IS_FILE_PATH_DOES_NOT_EXIST |
The file path does not exist. |
210 |
IS_INVALID_WINDOW_HANDLE |
Invalid Window handle |
211 |
IS_INVALID_IMAGE_PARAMETER |
Invalid image parameter (position or size) |