Author: Jon Chouinard

Posted on

Learn how “Pixel Clock Overdrive” by IDS created the fastest frame rates on the market using ON-SEMI Python Sensors!

IDS Imaging USB3.0 cameras with ON-SEMI Python image sensors just got faster by 30 %+ !

With the new release of the v4.80 of the IDS Cockpit software, several new features have been added including “Pixel Clock Overdrive”.  We have been touting the speeds which can be achieved with the new ON-SEMI Python sensors, but now IDS has bragging rights. 

With pixel clock overdrive, IDS’s CP USB3 cameras are the fastest on the market!



Using the new release (v4.8), a feature has been added allowing the pixel clock to be driven faster. This in turn results in higher frame rates surpassing key competitors on the market.  

1st Vision has compiled data showing the new higher frame rates in the chart to the left. 

 
Links to all IDS CP2 camera specifications with Python Image sensors can be found below: 

UI-3130CP – 800×600 
UI-3140CP – 1280×1024 
UI-3160CP – 1920 x 1200
UI-3180CP – 2592 x 2048





What’s the trick to achieve sustained, high speed frame rates?    
As camera sensors are getting faster, it becomes very important to ensure the right hardware is used.  Here are a few tips: 

  • Good Cables – Not all USB3 cables are created equal.  Poor cable quality can result in lost frame and an unstable system.  Ensure you have purchased USB3 cables that fully supports the USB3 vision standards.  
  • USB3 supported hardware – In high bandwidth applications, it becomes important to ensure your hardware supports the data transfer.  You must have a high performance PC to process the data.  A USB3.0 host controller with a Renesas chipset supporting multiple lines will be required to support the high data transfer.  Various approved USB3 adapters can be found HERE.
  • IDS Cockpit 4.8 or higher software supporting pixel clock overdrive and on-board camera memory for IDS cameras

Watch this quick tutorial to learn how to setup the IDS Cockpit software.  This short video will show you the right settings to achieve the the fastest frame rates.      


Did you know the new ON-SEMI sensors provide benefits of vertical and horizontal partial scanning!
Previous CMOS sensors only allowed an increase in frame rates by setting up a partial scan reducing the image height (y-axis).  Setting a Region Of Interest (ROI) or window in x and y-axis’s previously did NOT provide further gains until now!  The ON-SEMI Python sensors now allow speed increases from windowing in the x-axis in addition to the y-axis!




















Want to see this in action?  Visit us at 
The Vision Show in Boston 
May 3rd – 5th in booth 1209

 

1st Vision has extensive knowledge in industrial imaging and can help answer any questions.  We have over 100 years of combined knowledge and look forward to discussing your application.  

Please do not hesitate to Contact us!  1st Vision can provide a complete solution including cameras, lenses, lighting and cables.  

Ph:  978-474-0044
info@1stvision.com
www.1stvision.com  

Follow us on Social Media!

    https://www.facebook.com/pages/1st-Vision/944658058935262?fref=ts         

Posted on

Fujinon introduces new HF-XA 5/3 Megapixel lens line

Fujinon’s new HF-XA lenses are optically 5MP in the center, 3 MP at the edges, but are priced at the same or less than competitors 2-3MP lenses.

Other 2-3MP lenses are rated only for their centers, in turn, as you get off axis the quality diminishes.  

Fuji’s lenses are 3MP at the edges and even higher at the center!











Features of the new Fujinon HF-XA Series include

  • Support up to 5 Megapixels in lens center, 3 Megapixel at edge. 
  • 2/3″ sensor format
  • Maintains edge to edge sharpness that fully resolves pixel pitches down to 4.4um
  • Compact and lightweight body with a diameter of 29.5mm.  Fits nicely with common 29mm cube cameras!
  • Designed for installation convenience – Three screw holes are provided on the iris and focus rings for affixing the lens in place.  When screwing down the lenses iris and focus rings in tight spaces, you can choose from those positions for greater installation convenience.  
Fujinon HF-XA main specifications as follows  –  Full data sheets can be found HERE







































Need help?   We’re here for you!

1st Vision has many resources to help you in selecting a lenses and cameras..or you can just contact us!   Here’s a few resources that can help you:

  • Blog – Our Blog posts continue to have new information and tutorials on lenses.  See the specific lens posts HERE.




1st Vision has extensive knowledge in industrial imaging and can help answer any 
questions.  We have over 100 years of combined knowledge and look forward to discussing your application.  

Please do not hesitate to Contact us!  1st Vision can provide a complete solution including cameras, lenses, lighting and cables.  

Ph:  978-474-0044
info@1stvision.com
www.1stvision.com  

Follow us on Social Media!

    https://www.facebook.com/pages/1st-Vision/944658058935262?fref=ts           

Posted on

Ultra High resolution cameras up to 100MP! – Solutions for high end aerial surveillance to industrial

Need high resolution cameras for UAV, aerial surveillance, GIS mapping or high end industrial applications to name a few?

1st Vision is pleased to announce our partnership with Phase One Industrial!  

With resolutions from 50 to 100 MP, Phase One’s IXU cameras are the worlds smallest and lightest integrated digital medium format cameras on the market.  


With choice of ultra-high Megapixels sensors and lens options, a solution is available for standalone use, building an array for oblique / nadir photography or medium format photography (larger than 35mm formats).  Phase One has solutions for everything from small UAV’s to large manned aircraft and many higher end industrial applications.  

Applications include: 

  • Aerial surveillance
  • Mapping
  • Forestry, vegetation identification, agricultural crop monitoring
  • Asset management
  • 3D modeling
  • Crowd monitoring
  • Oil and gas pipeline & Power line monitoring
  • Coastal surveillance

Camera features include:

  • Resolutions to 100 MP
  • Auto Exposure modes
  • Small form factor – Allows for easy integration into gyro stabilization mounts or belly holes in many aircraft.
  • Forward motion compensation – Compensates for image blurring occurring as a result of slower shutter speeds or faster flight speeds.
  • Compatible with leading flight management systems and GPS receivers
  • Near IR capabilities
  • RS 232 for full lens control
  • Free Capture and Edit software


Accuracy

Each Phase One camera design undergoes rigorous testing for vibrations and temperature ranges. Every camera is subjected to tests for functionality and performance as it goes through the assembly process. Despite the in-flight vibrations and sudden movements during takeoff or landing that the camera might be exposed to, the consistency and the rigidity of the camera and lens provide metric data with pinpoint accuracy for mapping and other industrial applications.
1st Vision has extensive knowledge in industrial imaging and can help answer any questions.  We have over 100 years of combined knowledge and look forward to discussing your application.  

Please do not hesitate to Contact us!  


Ph:  978-474-0044
info@1stvision.com
www.1stvision.com  

Follow us on Social Media!

    https://www.facebook.com/pages/1st-Vision/944658058935262?fref=ts           

Posted on

Advanced Illumination Eurobright Illuminators combine lights and an intelligent controller.. All for the price of a light!

Advanced Illumination has released their new EuroBright lighting product line.  The new lighting line provides the highest levels of strobed or continuous operation using “FlexTech” technology and does not require additional controllers.  

FlexTech™ is Advanced Illumination’s exclusive technology collection which they have spent years perfecting. This consists of self-sustaining technologies for your system protection and your peace of mind.

The EuroBright Series consists of 6 styles of illuminator’s providing various lighting geometries from area illumination to back lighting.  Each light style can be ordered in various wavelengths and has self contained electronics allowing continuous or strobe operation.  

EuroBright Illuminators are feature rich with the following key features:

  • Low cost, feature-rich design
  • Robust IP67 enclosures
  • On-board smart driver – seamlessly provides strobe or continuous operation
  • Adaptive Overdrive – Optimized power under all strobe conditions
  • Adaptive Power – Optimal heat damage protection
  • Daisy-chain options in select models
  • Red, White and Blue wavelengths available.  

What are the benefits of FlexTech technology?  

In essence, FlexTech technology maximizes intensity even in varied temperature conditions ensuring the illuminator is providing maximum performance and protected.  

You do not have to worry about over driving the light source.. FlexTech does this for you!

What benefits does FlexTechnology bring to EuroBright Illuminators? 

Adaptive Overdrive

Adaptive Overdrive™ shapes the output pulse of the illuminator to maximize the intensity seen in the image. This technology allows for a very flexible on-board driver where the output is always performing at its peak with any camera exposures.



Adaptive Power

Adaptive Power allows for the user to “train” the light to operate in varied external temperatures. This was designed primarily for the EuroBrite™ Series of lights. Training allows the controller to identify the correct operational current such that the light does not overheat. Adaptive Power guarantees maximum brightness and lifetime regardless of the installation.

Smart Power Allocation
Smart Power Allocation performs load-balancing to be sure each individual channel on a controller is always being utilized to its fullest. Rather than relying on a fixed “current” for a light, factors such as voltage and string combination are considered in determining the correct operating range. Standard products have up to a 30% higher output with this feature enabled.

Packed with features, EuroBright illuminators are one of the most advanced lights on the market for a great price!  Email us with your contact details for a quote.


Need help to ID the correct lighting for your application?  We have a lighting expert on staff to discuss how to solve your application!  

1st Vision has extensive knowledge in industrial imaging and can help answer any questions.  We have over 100 years of combined knowledge and look forward to discussing your application.  

Please do not hesitate to Contact us!  1st Vision can provide a complete solution including cameras, lenses, lighting and cables.  

Ph:  978-474-0044
info@1stvision.com
www.1stvision.com  

Follow us on Social Media!

    https://www.facebook.com/pages/1st-Vision/944658058935262?fref=ts