Allied Vision G-130 TEC1 SWIR Camera

1stVision is pleased to announce that we can obtain Allied Vision’s new G-130 TEC1 SWIR camera for our customers. Utilizing Sony’s innovative IMX990 sensor, based on their SenSWIR technology, the camera is responsive in both the visible as well as the short-wave infrared range, spanning from 400 – 1700nm.

AVT G-130 TEC1 SWIR camera

While there are a number of cameras that cover short-wave infrared (SWIR) alone, from 900 – 1700nm, this sensor’s responsivity down to 400nm in the visible range opens up applications possibilities not previously possible with a single sensor camera.

Besides the wide spectral range, the sensor uses small 5µm pixels, with high quantum efficiency, offering precise detection of details.

The Goldeye 130 with IMX990 1.3MP SXGA sensor can deliver 110fps with Camera Link interface, or 94fps with GigEVision interface. The camera is fan-less, using thermoelectric sensor cooling (TEC1), yielding a robust and compact design.

Contact 1stVision for support and / or pricing.

Click to contact
Give us some brief idea of your application and we will contact you to discuss camera options.

1st Vision’s sales engineers have an average of 20 years experience to assist in your camera selection.  Representing the largest portfolio of industry leading brands in imaging components, we can help you design the optimal vision solution for your application.

Allied Vision Alvium with Sony Pregius Gen 4 Sensors

Allied Vision Alvium camera image

1st Vision is pleased to relay that Allied Vision has introduced new Alvium machine vision camera models featuring 4th gen IMX Sony Pregius S global shutter sensors. The sensors feature an improved back side illuminated pixel architecture that can capture light more effectively. This leads to improved quantum efficiency (QE) compared to 2nd and 3rd generation IMX sensors. Because of the decreased pixel size of 2.74µm, higher pixel densities and resolutions for the same optical format are possible.

Allied Vision Alvium

The IMX542 sensor in the 1800 U-1620 models has a 16:9 wide screen format similar to the IMX265 (2nd gen.). It is practically the same size but has almost twice the resolution. So, the FOV is nearly the same but at a much higher resolution. This sensor is especially suited for ITS applications.

The IMX540 sensor in the 1800 C/U-2460 models has an almost square format. Even though it is not much wider than the IMX304 (2nd gen.), it is considerably higher. It is a solid, lower priced alternative to the OnSemi Python 25k sensor, which has a similar resolution and aspect ratio, but is much larger.

The IMX541 sensor in the 1800 U-2040 models has a square format which was only available in the larger IMX367, but is now available as a C-mount camera in a sugar cube housing. This makes it especially suited for microscopy applications.

A summary of the new Alvium USB3 camera is as follows:

CameraSensorResolutionFormatFrames / Sec
1800 U-1620Sony IMX54216.2 MP5328×304022
1800 U-2040Sony IMX54120.4 MP4512×451217
1800 U-2460Sony INX54024.6 MP5328×460814
New Alvium cameras with Sony 4th Gen Pregius sensors

Contact 1stVision for support and / or pricing.

Click to contact
Give us some brief idea of your application and we will contact you to discuss camera options.

1st Vision’s sales engineers have an average of 20 years experience to assist in your camera selection.  Representing the largest portfolio of industry leading brands in imaging components, we can help you design the optimal vision solution for your application.

Opto Imaging Modules Provide a Turn-Key Solution

Demanding imaging applications require particular combinations of image sensor, lens, and lighting in order to achieve an optimal image.  It can be challenging to choose the right components and configure them in a compact space. An attractive solution for many is to use “Imaging Modules” which contain an integrated camera sensor, lens and lighting in an “all in one” housing.  A range of imaging modules are available, each configured to optimize component alignment and operations. The end-user may quickly deploy a new system, benefiting from the standardized systems, economies of scale, and expertise of the module builder.

Simplified example of imaging module key components

Opto Imaging GmbH offers imaging modules based on their more than 40 years experience in imaging.  Early leaders in imaging software, they also led with products and systems for stereo microscopy imaging, fluorescence imaging, metrology, surface imaging, and bioimaging.  They now offer Opto Imaging Modules, a collection of “plug-n-play” imaging systems for rapid deployment in diverse situations.

Here are 5 key benefits derived from using Opto Imaging Modules :

One unitCompact integrated sensor, lens, and lighting, optimally calibrated and tested
One wireUSB-C provides power, control signals, and images, and image data on a single cable
Plug and playRapid turn-key deployment into your environment, with minimal configuration, and confidence to achieve reliable results, thanks to pre-configuration by the manufacturer
Free viewer https://www.opto.de/en/software/opto-viewer/
SDK includedOr use any standard SDK you may prefer
Five key benefits of Opto Imaging Modules

Application areas include but are not limited to:

Machine vision microscopy: Hardness testing, bond inspection, scratch analysis, automated measurements and documentation, metrology, and more.

Industry 4.0 production micro imaging: With a measurement resolution of 1.8 micrometers per pixel, it enables the analysis of the smallest details.

Surface inspection: For example, of highly-reflective metal surfaces: https://www.opto.de/media/solino-slider.gif

Macro imaging: Traditional machine vision of scenes or objects larger than 20mmx20mm. Options include megapixel sensors and/or telecentric optics.

Watch this short video captured with an Opto Imaging module, capturing blood cells in a biomedical application: https://www.youtube.com/watch?v=E4Uy00rzejI 

Demonstrations are available: virtual demos are available by appointment, and demo loaners are available to try in your own environment.

Click to contact
Give us some brief idea of your application and we will contact you to discuss camera options.
Opto Imaging Modules offer varied sub-components pre-configured and calibrated to work together

1st Vision’s sales engineers have an average of 20 years experience to assist in your camera selection.  Representing the largest portfolio of industry leading brands in imaging components, we can help you design the optimal vision solution for your application.

Teledyne DALSA launch “Linea Lite” line scan cameras

Linea Lite and Linea sizes compared

The “Linea Lite” 2k and 4k line scan cameras provide industry-leading performance in a compact package. Built for a wide-range of machine vision applications, the new Linea Lite cameras feature a 45% smaller footprint than the original Linea and are based on a brand new, proprietary CMOS image sensor designed by Teledyne Imaging. This expands on the success of the Linea series of low cost, high value line scan cameras.

Designed to suit many applications, the Linea Lite offers customers a choice between high full well mode or high responsivity mode, via easy to configure gain settings.

Linea Lite (left) vs. original Linea (right – with lens) (Note: original Linea series also available)
Linea Lite 4k – Linea 4k

The cameras are available in 2k and 4k resolutions, in monochrome and bilinear color. Linea Lite has all the essential line scan features, including multiple regions of interest, programmable coefficient sets, precision time protocol (PTP), and TurboDrive™. With GigE interface and power over Ethernet (PoE), Linea Lite is an excellent fit for applications such as secondary battery inspection, optical sorting, printed materials inspection, packaging inspection, and many more.

Linea Lite Specifications

Download full specifications here.

KeyFeatures:

– 7µm or 14µm pixels

– 2k and 4k resolutions

– Configurable full well

– Precision time protocol

– Selectable 8 or 12-bit output

Contact us for a quote

1st Vision’s sales engineers have an average of 20 years experience to assist in your camera selection.  Representing the largest portfolio of industry leading brands in imaging components, we can help you design the optimal vision solution for your application.