Category: CMOS

Posted on

Low Cost imaging solutions starting @ $120 address remote focus and zoom up to 5MP

Industrial imaging applications ranging from medical and process monitoring to security and kiosks need cameras with highly functional lens control. Solutions need to be easily integrated and have the ability to remotely control the camera focus, zoom and light exposure. Depending upon the application, there are several solutions which are highlighted in this blog to satisfy a large range of applications.

 

Economical Solution  –  Feature rich

IDS’s Tiny XS 
IDS’s XS camera is perfect for applications requiring economical solutions which are small in size, lightweight requiring auto focus, automatic gain and remote digital zoom capabilities. Equipped with Aptina’s 5 Megapixel CMOS Sensor, the camera delivers excellent image quality and color reproduction.  Using the IDS Cockpit software, this camera sets up in minutes via a USB2.0 interface. 


Key Features:

  • Auto focus using a high resolution sensor (2592 x 1944 pixels)
  • Automatic Gain for varying lighting conditions
  • Remote Digital Zoom capabilities
  • Impressive video capture (5MP @ 15 fps) or higher frame rates with reduced resolution
  • Small, Light Weight – only 12 g and measuring 23×26.5×21.5 mm the XS is perfect for even the tiniest spaces.
  • Full manual control for all features available through the IDS free SDK which includes programming examples 
Want additional information?  Full Datasheets, manual and software can be found HERE

 

Low cost starting @ $120

IDS Video Class “Industrial Web Camera” – UV-1551LE

The IDS UV-1552LE-C USB Video Class camera uses a standard UVC driver with easy plug and play installation. Starting at $120 in volume, this camera is well suited where cost is most important.  No special drivers are needed. Just connect the camera to your computer and start receiving images just like a web camera!

The USB Video Class (UVC) standard 1.1 supported by the camera guarantees the use of the camera on all operating systems (Windows, Linux, Mac etc.)  The UV-1551LE-C camera is ideally suited for use as an industrial web camera in kiosks to video conference systems.

Configurations are available as a board level version with no lens mount (Model UI-1552LE) or with a S-mount lens adapter included (Model UI-1551LE).

Full Datasheets and manuals can be downloaded below for each version
Model
UI-1551LE
UI-1552LE

For all your imaging needs, you can visit www.1stvision or contact us! to discuss your application in further detail or receive a quote.

 

    https://www.facebook.com/pages/1st-Vision/944658058935262?fref=ts           
Posted on

This camera provides Versatility, Performance and a nice price. What is the JAI’s GO 5000 series?

JAI’s GO 5000 delivers an exceptional blend of high versatility, excellent performance, small size and best of all at a price of < $1K.  


The GO provides the perfect starting point for a wide range of machine vision applications.


The GO-5000 packs a high performance 5-megapixel CMOS imager (Anafocus Lince5M) into a compact form factor that fits in your fingertips. Using a combination of ROI and binning capabilities, this tiny camera can become almost anything you want – from a super-fast VGA camera (at nearly 450 fps) to a super sensitive camera using binning to create 10-micron, or even-20-micron effective pixel sizes.

High image quality
The GO-5000’s imager features a combination of analog and digital gain controls to reduce the amount of quantized noise in low-light images compared to conventional CMOS imagers offering digital gain functions alone. On the color models, an on-chip 4-channel analog gain function is utilized to allow individual adjustment of R, G, and B information for better white balancing with reduced noise.

Even at megapixel resolutions, the GO Series doesn’t resort to a rolling shutter or small pixels with low signal-to-noise ratios. 5-micron square pixels, global shutter, analog gain control, a built-in lookup table, and other advanced features help ensure image quality beyond entry-level expectations. 

Choose of image size and frame rate using Multiple ROI & binning options
Featuring multiple binning options and single or multiple ROI’s the GO-5000 can be easily configured to meet a wide range of customer requirements for resolution, speed, and optical formats.

For example, by creating a centered 1920 x 1080 ROI, users can configure the GO-5000 to provide high-speed 1080p HD video that fits completely within the optical format of a 2/3” C-mount lens. This is in contrast to CMOS cameras with 5.5 micron pixels which generate 1080p image sizes that are slightly larger than the standard 2/3” optical circle, thus requiring more expensive 1” image optics to ensure that vignetting will not occur.
Note: frame rates shown above are for GO-5000-USB and GO-5000-PGE, respectively.
Monochrome models feature a range of binning options including 2×2 and 4×4 binning to allow users to effectively create 10-micron, or even 20-micron, square pixels to maximize sensitivity and signal-to-noise characteristics for specific applications, as well as increasing the overall frame rates.

Choice of interfaces
Choose one of the advanced digital interfaces that best fits your needs. Options include powered interfaces (PoE) where a single-cable solution is desired, as well as both frame-grabber-based (PMCL) and “grabberless” configurations using GigE and USB3.0


Small size and weight
GO Series cameras measure 29 x 29 x 41.5 mm (excluding lens mount) and weigh less than 50 grams, enabling them to fit into small spaces or into vehicles or other applications where weight is critical.

The GO-5000 is one of the smallest 5-megapixel cameras available and weighs only 46 grams (lens not included)
 
Want additional information?  Full Datasheets for the GO 5000 can be found HERE.


For all your imaging needs, you can visit www.1stvision or contact us! to discuss your application in further detail.  
 
    https://www.facebook.com/pages/1st-Vision/944658058935262?fref=ts           
Posted on

Canon EF mount integrated into AVT’s GT1930L camera

Canon EF mount fully integrated 

The GT1930L EF is the first Allied Vision camera to receive an integrated Canon EF mount, allowing lens focus and iris to be adjusted through camera controls in the Vimba SDK or 3rd party software. No additional cabling is required, with lens drive power taken from camera power (PoE or Hirose powered). In the past, this has typically been accomplished via a third party mount adding more complexity to the overall solution.  

Stay tuned as this is the first integrated Canon EF mount..  but not the last!  Additional camera models will soon follow.  

Performance

The GT1930L EF is equipped with a Sony IMX174 Pregius™ global shutter CMOS sensor with a resolution of 1936 x 1216 pixels (2.35 MPixel) and frame rate of 50.7 fps (55.7 fps in burst mode) over Gige Vision interfaces. 

Extreme Conditions

The GT1930L EF is a great solution in applications where the GT’s impressive housing temperature range of -30 to +70 °C is an advantage, Canon EF lens control is needed, or a tight sensor to mount planarity tolerance is required.  Applications include outdoor imaging, traffic, high end security, MIL/Aerospace, machine vision and industrial inspection. 


Key Features include

  • Canon EF Lens control
  • Rugged Design for extreme environments
  • Power Over Ethernet (PoE)
  • Camera temperature monitoring
  • Extended Temperature range
  • IEEE 1588 Precision Timing Protocol
  • ROI capabilities
  • Binning
  • Auto Exposure, Gain and White balance
  • Reverse X/Y
  • LUT Look up Tables
  • IR cut filter options
Want additional information?  Full Datasheets for the GT1930L can be found HERE.


For all your imaging needs, you can visit www.1stvision or contact us! to discuss your application in further detail.  
    https://www.facebook.com/pages/1st-Vision/944658058935262?fref=ts           
Posted on

Dalsa Linea – GigE 80kHz LineScan @ $1100

Dalsa’s newest innovation is cost!



Introducing Linea, a CMOS line scan camera that can help you improve your imaging and lower your costs. Linea starts with an advanced CMOS sensor with high quantum efficiency and low noise for better images. Linea is also packed with advanced features to make your machine vision job almost effortless.


Linea uses Teledyne DALSA’s own advanced CMOS line scan sensors which are available in resolutions from 2k to 16k.



Extensive Feature Set


TurboDrive™ technology allows Linea GigE to deliver its full image quality at line rates up to 80 kHz—several times faster than competitors—with no changes to your GigE network.






    Multiple Regions of Interest to let you reduce your data transfer and processing load — all of which not only help boost performance but also reduce your system cost.







      Burst Modes can take advantage of its high speed sensor by capturing and buffering high speed bursts faster than GigE allows.

      HDR (High Dynamic Range) lets you combine short and long exposures to see details in bright and dark areas at the same time.



      Cycling Mode lets you change your settings every line and cycle through up to five different user-controlled configurations.  This allows use of different light sources, lighting angles, exposure time and gain from a single pass.



      Trigger to Image Reliability framework gives you data reliability peace and of mind by controlling and monitoring the entire image capture process from trigger through image capture and transfer to host memory, protecting you from data loss and improving the reliability of your inspection system.




        Suited for applications in postal, pharmaceutical, print, material and food inspection, Linea is a smart choice with low cost and excellent performance. 

        Full data sheets for linear are available HERE

        For all your imaging needs, you can visit www.1stvision or contact us! to discuss your application in further detail.  

            https://www.facebook.com/pages/1st-Vision/944658058935262?fref=ts