IDS peak 2.20.0 / uEye+ firmware 3.80

IDS Peak comfortSDK, genericSDK, AFL, ICL, and IPL developer manuals are external documents.
Please contact us if you need these manuals.

ROI

•The frame rate does not increase by the use of a horizontal ROI.

Binning

•Horizontal and vertical binning can only be used jointly.

Decimation

•The model only supports FPGA decimation and no sensor decimation.

Flash

•The sensor does not support flash.

GigE uEye+ LE Rev. 2

The model does not support the following features:

•Automatic exposure (ExposureAuto)
Alternatively, you can perform auto exposure on the host with IDS peak comfortSDK or you can use the auto functions in IDS peak genericSDK.

•Automatic gain (GainAuto)
Alternatively, you can perform the gain functions on the host with IDS peak comfortSDK or you can use the auto functions in IDS peak genericSDK.

•Automatic white balance (BalanceWhiteAuto)
Alternatively, you can perform the automatic white balance on the host with IDS peak comfortSDK or you can use the auto functions in IDS peak genericSDK.

•Chunks (ChunkDataControl)

•Color correction (ColorCorectionMode)
Alternatively, you can perform color correction on the host.

•Gamma (Gamma)
Alternatively, you can perform gamma on the host.

•Line scan mode (SensorOperationMode "Linescan")

•LUT (LUTControl)

•Pulse-width modulation (PWMControl)

•Sequencer (SequencerControl)