IDS peak 2.10.0 / uEye+ firmware 3.34

IDS Peak comfortSDK, genericSDK, IPL, and AFL developer manuals are external documents. Please contact us if you need them.

Sensor

•You can change the camera's shutter mode (SensorShutterMode) to "GlobalReset". However, you must first activate the trigger mode (TriggerMode), since the GlobalReset function requires the use of an external flash.

•If you activate the "GlobalReset" shutter mode, the value of the minimum exposure time (ExposureTime) increases.

•In the "GlobalReset" shutter mode, the upper image edge is darker because the first line is exposed shorter.

ROI

•The frame rate does not increase by the use of a horizontal ROI.

Binning

•In some cases, the first image is incorrect after binning is activated.

Decimation

•The model only supports FPGA decimation and no sensor decimation.

•The frame rate does not increase with decimation.

Trigger

•The model does not support trigger controlled exposure, see ExposureMode "TriggerControlled".

Black level

•Only deactivate the sensor's own automatic black level control if you carefully evaluate the camera's operation afterwards, as this may cause deviating image quality. It is recommended to use the sensor's own black level control.

Pixel format

•Due to the manufacturer, the minimum and maximum pixel values are not used for the sensor pixel formats. For example, in a 12-bit pixel format, only the value 4094 is reached for saturation, but not 4095.