Camera timing |
|
USB 3 uEye CP Rev. 2.1 |
Pixel clock range*1 |
MHz |
120 – 480 |
Frame rate freerun mode*2 |
fps |
73 |
Frame rate trigger mode (continuous)*2 |
fps |
73 |
Frame rate trigger mode (max.)*2 |
fps |
81 |
Exposure time (min.*2 – max.*3) |
ms |
0.052 – 500 |
Long exposure (max.) |
ms |
1 000 |
AOI |
|
|
Mode*4 |
|
Horizontal + vertical |
AOI image width / step width |
pixels |
128 – 2592 / 16 |
AOI image height / step width |
pixels |
2 – 2048 / 2 |
AOI position grid horizontal / vertical |
pixels |
16 / 2 |
Binning |
|
|
Mode |
|
Monochrome: horizontal + vertical |
Method |
|
Monochrome: H + V: monochrome binning, H + V: averaging |
Factor |
|
Monochrome: 2x |
Subsampling |
|
|
Mode*4 |
|
Horizontal + vertical |
Method |
|
Monochrome/color: automatic |
Factor |
|
2x |
Hardware trigger |
|
|
Mode |
|
Asynchronous |
Adjustable trigger delay |
µs |
15 – 4 000 000 |
Power consumption |
|
|
Power consumption (min, max)*5 |
W |
1.6 – 4.3 |
*1 The maximum possible pixel clock frequency depends on the PC hardware used. Depending on camera model and operating mode, the relationship between pixel clock and exposure time must be considered.
*2 Requires maximum pixel clock frequency. Depending on camera model and operating mode, the relationship between frame rate and exposure time must be considered.
*3 Requires minimum pixel clock frequency. Depending on camera model and operating mode, the relationship between frame rate and exposure time must be considered.
*4 Use of this function increases the frame rate.
*5 The power consumption depends on the sensor model and the pixel clock setting.