IDS Software Suite 4.96.1
Camera timing |
|
uEye SE USB 3.1 Gen 1 |
USB 3 uEye CP Rev. 2 |
GigE uEye CP Rev. 2 / Rev. 2.2 |
GigE uEye CP |
Pixel clock range*1 |
MHz |
38 – 344 |
38 – 344 |
38 – 120 |
38 – 84 |
Frame rate freerun mode*2 |
fps |
80 |
80 |
28 |
19 |
Frame rate trigger mode (continuous)*2 |
fps |
- |
- |
28 |
- |
Frame rate trigger mode (max.)*2 |
fps |
80 |
80 |
28 |
19 |
Exposure time (min.*2 – max.*3) |
ms |
0.038 – 500 |
0.038 – 500 |
0.054 – 500 |
0.054 – 499.71 |
Long exposure (max.) |
ms |
- |
- |
- |
- |
AOI |
|
|
|
|
|
Mode |
|
Horizontal + vertical*4 |
Horizontal + vertical*4 |
Horizontal + vertical*4 |
Horizontal + vertical*4 |
AOI image width / step width |
pixels |
16 – 2048 / 4 |
16 – 2048 / 4 |
16 – 2048 / 4 |
16 – 2048 / 4 |
AOI image height / step width |
pixels |
2 – 2048 / 2 |
2 – 2048 / 2 |
2 – 2048 / 2 |
2 – 2048 / 2 |
AOI position grid horizontal / vertical |
pixels |
4 / 2 |
4 / 2 |
4 / 2 |
4 / 2 |
Binning |
|
|
|
|
|
Mode |
|
- |
- |
- |
- |
Method |
|
- |
- |
- |
- |
Factor |
|
- |
- |
- |
- |
Subsampling |
|
|
|
|
|
Mode |
|
Horizontal + vertical*4 |
Horizontal + vertical*4 |
Horizontal + vertical*4 |
Horizontal + vertical*4 |
Method |
|
Monochrome/color: automatic |
Monochrome/color: automatic |
Monochrome/color: automatic |
Monochrome/color: automatic |
Factor |
|
2x, 4x, 6x, 8x, 16x |
2x, 4x, 6x, 8x, 16x |
2x, 4x, 6x, 8x, 16x |
2x, 4x, 6x, 8x, 16x |
Hardware trigger |
|
|
|
|
|
Mode |
|
Asynchronous |
Asynchronous |
Asynchronous |
Asynchronous |
Adjustable trigger delay |
µs |
15 – 4 000 000 |
15 – 4 000 000 |
15 – 4 000 000 |
15 – 4 000 000 |
Power consumption |
|
|
|
|
|
Power consumption (min, max)*5 |
W |
1.8 – 3.9 |
1.8 – 3.6 |
12 V: 1.7 – 3.1 24 V: 1.9 – 3.2 PoE (44 V): 2.7 – 4.1 PoE (56 V): 3.1 – 4.5 |
1.8 – 2.6*6 PoE: 2.8 – 4.1 |
*1 The maximum possible pixel clock frequency depends on the PC hardware used. Depending on camera model and operating mode, the relationship between pixel clock and exposure time must be considered.
*2 Requires maximum pixel clock frequency. Depending on camera model and operating mode, the relationship between frame rate and exposure time must be considered.
*3 Requires minimum pixel clock frequency. Depending on camera model and operating mode, the relationship between frame rate and exposure time must be considered.
*4 Use of this function increases the frame rate.
*5 The power consumption depends on the sensor model and the pixel clock setting.
*6 Values are valid for operation with 12 V external power supply without Power-over-Ethernet.
