|
Camera specifications |
---|---|
Design |
|
Housing/board level |
+/- |
Dimensions height x width x depth |
26.5 x 23 x 21.5 mm |
IP code |
IP 30 •Protection against the ingression of small particles (diameter ≥ 2.5 mm) •No protection against water |
Lens mount |
Integrated |
Mounting holes bottom/top/side/front |
0/0/0/2 |
Thread diameter |
M3 hole |
Status LED |
The USB uEye XS does not have a status LED. |
Ambient conditions |
|
Connectors |
- |
Interface connector |
USB 2.0 mini B Note: The USB cable connected to the camera must not be routed outside buildings when the USB cable of the camera is connected to a widely distributed USB network. |
Power supply |
USB |
I/O connector |
- |
Optocoupler for I/O |
- |
Trigger input/Flash output/GPIO |
- |
PWM (pulse-width modulation) |
- |
Serial interface |
- |
TWI (Two Wire Interface) |
- |
Special features |
Autofocus lens JPEG compression |
Image memory (approximately) |
- |
Note on positioning accuracy In applications where the positioning accuracy of the sensor is important, an appropriate calibration of the camera must be provided. |