Please enable JavaScript to view this site.

IDS Software Suite 4.96.1

Navigation: D: Specifications > USB uEye SE

Status LED USB uEye SE

Scroll Previous Top Next More
Fig. 552: USB uEye SE - Status LED

Fig. 552: USB uEye SE - Status LED

The LED on the rear side of the camera indicates whether

the uEye camera is powered on – LED lights up red (only USB board rev. 2.0 or higher).

the uEye driver has been loaded and the camera is operational – LED lights up green

an error has occurred – green LED flashes:

o2x flash: unknown sensor, please contact our support team.

If the LED does not light up green, please check the following:

Has the camera been connected correctly?

Have the driver and the camera been installed properly in the IDS Camera Manager on the host PC?

Does the host PC meet all system requirements?

hint_info

On some USB uEye models, the LED first lights up orange for 4 seconds. On completion of the initialization process, the LED briefly changes to red and then to green when the camera has been successfully started. This information applies to the following models:

UI-214x

UI-228x

 

© 2022 IDS Imaging Development Systems GmbH