IDS Software Suite 4.96.1
|
This section of the manual contains information on connecting the cameras and wiring IOs. For information on a camera's power consumption, please refer to the Camera and sensor data section. This section contains information on all camera models sorted by sensor type. |
Pin assignment GigE connector (RJ45) GigE uEye CP Rev. 2 / Rev. 2.2
Pin assignment I/O connector GigE uEye CP Rev. 2 / Rev. 2.2
Trigger input wiring GigE uEye CP Rev. 2 / Rev. 2.2
Flash output wiring GigE uEye CP Rev. 2 / Rev. 2.2
General Purpose I/O wiring GigE uEye CP Rev. 2 / Rev. 2.2
 |
Exception: PoE may be considered a Network Environment 0 per IEC TR 62101, and thus the interconnected ITE circuits may be considered SELV, if: 1.the function of the ITE being investigated to IEC 60950-1 is considered not likely to require connection to an Ethernet network with outside plant routing, including campus environment; and 2.the installation instructions clearly state that the ITE is to be connected only to PoE networks without routing to the outside plant. |
