Please enable JavaScript to view this site.

IDS Software Suite 4.96.1

Navigation: D: Specifications

GigE uEye CP Rev. 2 / Rev. 2.2

Scroll Previous Top Next More

 

Camera specifications

Design

Mechanical specifications GigE uEye CP Rev. 2 / Rev. 2.2

Housing/board level

+/-

Dimensions height x width x depth

29 x 29 x 49.1 mm

IP code

IP 30

Protection against the ingression of small particles (diameter ≥ 2.5 mm)

No protection against water

Lens mount

C-mount, see Optical specifications GigE uEye CP Rev. 2 / Rev. 2.2

Mounting holes bottom/top/side/front

4/0/0/0

Thread diameter

M3

Status LED

Status-LED Gige uEye CP Rev. 2 / Rev. 2.2

Ambient conditions

Ambient conditions GigE uEye CP Rev. 2 / Rev. 2.2

Connectors

Electrical specifications GigE uEye CP Rev. 2 / Rev. 2.2

Interface connector

GigE RJ45, screwable

Power supply

PoE or 12-24 V external

I/O connector

8-pin Hirose HR25, screwable

Optocoupler for I/O

1/1

Trigger input/Flash output/GPIO

1/1/2

PWM (pulse-width modulation)

+

Serial interface

-

TWI (Two Wire Interface)

-

Special features

Internal pixel pre-processing

Power supply with Power-over-Ethernet

Image memory (approximately)

128 MB

© 2022 IDS Imaging Development Systems GmbH