IDS Software Suite 4.96.1

Design

Mechanical specifications USB uEye SE

Housing/board level

+/+

Dimensions height x width x depth

Housing version CMOS: 34 x 32 x 27.4 mm/CCD: 34 x 32 x 34.4 mm

PCB version CMOS: 30 x 30 x 22 mm/CCD: 30 x 30 x 27.3 mm

PCB version with C-mount CMOS: 30 x 30 x 30.2 mm/CCD: 30 x 30 x 37.2 mm

IP code housing version

IP 30

•Protection against the ingression of small particles (diameter ≥ 2.5 mm)

•No protection against water

IP code PCB version

IP 00

•No protection against the ingression of particles

•No protection against water

Lens mount

C-mount, see Optical specifications USB uEye SE

Mounting holes bottom/top/side/front

8/3/3/0

Thread diameter

M2/M3

Status LED

Status LED USB uEye SE

Ambient conditions

Ambient conditions USB uEye SE

Connectors

Electrical specifications USB uEye SE

Interface connector

USB 2.0 mini B

Power supply

USB

I/O connector

9-pin micro D-Sub socket, screwable

Optocoupler for I/O

1/1

Trigger input/Flash output/GPIO

1/1/0

PWM (pulse-width modulation)

-

Serial interface

-

TWI (Two Wire Interface)

-

Special features

USB uEye SE Rev. 3: Internal pixel preprocessing

Image memory (approximately)

-