USB cables with non-standard connectors must be connected to the camera first and then to the PC. Otherwise the camera might not be recognized correctly. |
9-pin micro D-Sub socket (MPE Garry 11-0021-50-09L)
Pin |
Description |
Fig. 545: USB uEye SE - Micro D-Sub socket male, camera rear view |
---|---|---|
1 |
Flash output with optocoupler (-) |
|
2 |
Trigger input with optocoupler (+) |
|
3 |
Shielding |
|
4 |
USB power supply (VCC) 5 V |
|
5 |
USB ground (GND) |
|
6 |
Flash output with optocoupler (+) |
|
7 |
Trigger input with optocoupler (-) |
|
8 |
USB data (+) |
|
9 |
USB data (-) |
You can check the color assignment of the cable on the Website directly at the specific accessory item.
The maximum length of the I/O cable is 30 m. The cable must be shielded. |