IDS Software Suite 4.96.1

Note on support of older USB cameras by driver versions 3.80 and higher

The following USB uEye camera models have been discontinued and will not be tested with new drivers from version 3.80 onwards. IDS Imaging Development Systems GmbH therefore cannot guarantee that these models will provide full functionality with new driver versions and operate without problems.

Only the following CMOS camera models of the USB uEye SE series are affected:

•UI-121x

•UI-141x

•UI-144x

•UI-145x

•UI-154x-C

Note on support of the uEye memory board by driver versions 3.30 and higher

The optional memory board of the USB uEye SE and USB uEye RE camera series has been discontinued. From version 3.30 onwards, the functions required to operate the memory board will no longer be supported in the uEye driver. The uEye driver version 3.24 that still supports these functions can be downloaded on our website in the software archive.

Note on support of older USB cameras by driver versions 3.10 and higher

From driver version 3.10 onwards, only USB uEye cameras with USB board revision 2.0 or higher are supported. To operate a camera with USB board revision 2.0 or earlier, you will need the uEye driver version 2.40. You can download this driver version from the download area of our website.

Only the following CMOS camera models of the USB uEye SE series are affected:

•UI-121x

•UI-141x

•UI-144x

•UI-145x

•UI-146x

•UI-154x