IDS Software Suite 4.96.1
|
This section of the manual contains information on connecting the cameras and wiring IOs. For information on a camera's power consumption, please refer to the Camera and sensor data section. This section contains information on all camera models sorted by sensor type. |
Pin assignment GigE connector (RJ45) GigE uEye LE
Pin assignment I/O connector GigE uEye LE
Trigger input wiring GigE uEye LE
Flash output wiring GigE uEye LE
General purpose I/O wiring GigE uEye LE
 |
NOTICE! Make sure to avoid mechanical or electrical damage of the printed circuit board or its connections. Do not touch the printed circuit board while it is powered. Always hold the board by the edges to avoid the risk of electrostatic discharge damage. |
All four mounting holes of the camera are potential free and have no connection to shield or ground.
