The "uEye" menu contains functions for image capture and camera configuration.
Initialize |
Open camera and show live image |
Initialize and stop |
Open camera |
Standby |
The camera changes to standby mode |
Close |
Close camera |
Reset to defaults |
Reset all values set in the demo program to the defaults |
Start live video |
Live video on/off |
Snapshot |
Snapshot from live video |
Sync Trigger (Rising Edge) |
Starts capture in freerun synchronization mode on the specified edge of the trigger signal. The freerun synchronization mode is currently only supported by camera models UI-146x/UI-546x. |
Sync Trigger (Falling Edge) |
|
Single trigger |
Triggered snapshot (software trigger) |
Continuous trigger |
Continuous triggered capture on/off Trigger source hardware/software can be set in the corresponding property page |
Properties ... |
Opens the camera properties dialog |
Auto contrast |
Activate automatic brightness control |
Set new AES/AGC AOI |
Define active area for automatic brightness control |
Clear AES/AGC AOI |
Clear active area defined for automatic brightness control |
Auto whitebalance |
Activate automatic white balance |
Set new AWB AOI |
Define active area for automatic white balance |
Clear AWB AOI |
Clear active area defined for automatic white balance |
Set a new sharpness measure AOI |
Define a new sharpness measurement AOI |
Clear all sharpness measure AOIs |
Clear all defined sharpness measurement AOIs |
Set new AOI |
After calling "Set new AOI", you can select an area of interest with the mouse |
Clear AOI |
Clears the area of interest (reset to full frame) |
User allocated image |
The memory is allocated not via the SDK function is_SetAllocatedImageMem(), but by the application |
Sound on transfer failed |
Output an acoustic signal if a transmission error occurs |
Error report |
Errors are displayed in a dialog box |
Clear counters |
Reset the counters (see uEye Cockpit status bar) |