12 V Power Supply - PSS-610-06 For all cameras that take power via 12 Pin Hirose: Allied Vision, Sony, JAI, Basler, Dalsa, Teli, Toshiba. Datasheet
12 V Power Supply for IDS GigE SE and CP Rev.1 Cameras - PSS-IDS-GIGE-SE This is a 12 V supply with a 6&squot; cable to a 6 Pin Hirose Connector specifically for the IDS GigE SE and CP1 cameras series (CP2 uses 8 Pin Hirose).
12 V Power Supply for Allied Vision Mako GigE Cameras PSS-HIR8TPS This is a 12 V supply with a 6’ cable to an 8 Pin Hirose Connector specifically for the Allied Vision Mako cameras series.
12 V Power Supply with Strobe & Trigger for Prosilica GC series - PSS-P-1H2BST-6 This is a 12 V supply with a 6' cable to a 12 Pin Hirose Connector. 2 BNC 6" pigtails come out of the hirose and are wired for trigger and strobe signals for either the Dalsa Genie GigE or JAI C3 Gige camera series. Separate PN for each manufacturer. Datasheet
12 V Power Supply with Strobe & Trigger for Genie - PSS-G-1H2BST-06 This is a 12V power supply with 6' cable to a 12 pin Hirose connector. Two BNC 6" pigtails come out of the Hirose and are wired for trigger and strobe signals for Dalsa Genie cameras This power supply replaces PN: PSWT-G-1H2BST-15 providing identical functionality, but with a 6' power cord.
Power over Ethernet Injector - PS-POE-INJ20W POE Injector specifically for GigE cameras from Allied Vision, Dalsa and IDS. Comes with power cord. DatasheetWhat you need to know about PoE
GigE RJ45 Male to RJ45 Male High-Performance CAT6 Data Cables - CB-ALY-G-C6-SL-xxM GigE RJ45 male to RJ45 male cable with screw locks from Alysium-Tech, high performance CAT6A and 10GigE compliant, unique 40-in-1 assembly design allows screw locking in any position, hi-flex >1M cycle models available with lengths up to > 50 meters, 1/2/3/5/10/20m lengths, custom lengths upon request with volume commitment, Datasheets and detailed information.
Genie Nano I/O flying leads cable Genie Nano I/O flying leads cable. 10 pin Santec to flying leads for use with Dalsa Nano Cameras. User to provide +12V/24V and GND. Datasheet
SAMTEC TFM-105 type 10-pin female to Tinned Leads I/O/Power Cable - Teledyne DALSA Genie Nano Cameras - CB-NANO-IO-xxM SAMTEC TFM-105 type 10-pin female to tinned leads I/O/power cable, flying leads, 1/2/3/5m lengths, custom lengths of 10/15/30m are available upon request (for powering PoE cameras when no PoE network is available) Note: PINOUTS BY CONDUCTOR COLOR HAVE CHANGED - Please refer to the document sheet inside of the cable wrapper for more details. Technical Diagram: Cable diagram
Hirose 12-pin Female to Tinned Leads I/O/Power Cable - JAI (various) & Dalsa Genie, Allied Vision (various) Cameras - CB-I/O-xxM Hirose 12-pin female to tinned leads I/O/power cable, 8" flying leads, 2/3/5/10m lengths, custom lengths upon request with volume commitment (for powering PoE cameras when no PoE network is available) Note: PINOUTS BY CONDUCTOR COLOR HAVE CHANGED - Please refer to the document sheet inside of the cable wrapper for more details. Technical Diagram: Black I/O Cable - Rev 7 effective 3/15/16 Grey I/O Cable - Legacy cables
Hirose 6-pin Female to Tinned Leads I/O/Power Cable - IDS CP1/ML & Allied Vision Mako USB Cameras - CB-HIR6-I/O-xxM Hirose 6-pin female to tinned leads I/O/power cable, 8" flying leads, 1/2/5/10m lengths, custom lengths upon request with volume commitment, FKA P/N CB-IDS-TRIG-GE-xxM (for powering PoE cameras when no PoE network is available) Note: PINOUTS AND CONDUCTOR COLOR ARE SUBJECT TO CHANGE. Technical Diagram: Grey I/O Cable
Hirose 8-pin Female to Tinned Leads I/O/Power Cable - IDS CP2 & Allied Vision Mako GigE Cameras - CB-HIR8-I/O-xxM Hirose 8-pin female to tinned leads I/O/power cable, 8" flying leads, 1/2/3/5/10m lengths, custom lengths upon request with volume commitment (for powering PoE cameras when no PoE network is available) Note: PINOUTS AND CONDUCTOR COLOR ARE SUBJECT TO CHANGE. Technical Diagram: Black I/O Cable
Quad PoE GigE PCIe x4 NIC card LR-PCIE-4PTPOE-1G PoE Quad NIC card with Intel® I350 chipsets. If you have 4 PoE cameras, the LR- PCIE-4PTPOE-1G card is a cost effective way to interface and power the cameras. DatasheetWhat you need to know about PoE
Dual 10GigE POE PCIe x2 Gen3 NIC card - Neousys PCIe-PoE550X 2-port 10GbE network adapter with IEEE 802.3at PoE+ machine vision frame grabber card, two 10GbE ports; Intel® X550-AT2 10 GigE controller, 10GbE & 10GbE 802.3at PoE+ with CAT-6/ 6a cable (Max. 100 meters), NBASE-T and 1000BASE-T with CAT-5/ 5e cable, compliant with IEEE 802.3at to deliver 25.5W each port, 15.5 KB jumbo frame, NIC teaming and IEEE 1588, per-port PoE+ power on/off control via API. DatasheetWhat you need to know about PoE
Dual GigE POE PCIe x2 NIC card - Neousys NEO-PCIE-POE352AT POE Dual NIC card with Intel® I350-AM2 server-grade chipsets. If you have 2 POE cameras the NEO-PCIE-POE352AT card is a very cost effective way to interface and power the cameras. Datasheet Manual What you need to know about PoE
Quad GigE POE PCIe x4 NIC card - Neousys NEO-PCIE-POE354AT POE Quad NIC card with Intel® I350-AM4 server-grade chipsets. If you have 4 POE cameras the NEO-PCIE-POE354AT card is the most cost effective way to interface and power the cameras. Datasheet Manual What you need to know about PoE
Intel Pro 1000 GigE Adapter Card PCIe Intel Pro 1000 Host Adapter Single Enet PCIe. Needed for high performance drivers when using GigE cameras. Can also be used with any filter driver solution. Datasheet
Intel Pro 1000 GigE Dual NIC Adapter Card PCIe Intel Pro 1000 Dual Host Adapter 2 Enet ports PCIe. Needed for high performance drivers when using GigE cameras. Can also be used with any filter driver solution. Do NOT use 4 port NIC card when using 4 cameras use 2 of these dual NIC adapters. Datasheet