Teledyne DALSA Xtium2-CL MX4 Camera Link Frame Grabber

The Teledyne Dalsa Xtium2™-CL MX4 high performance camera link frame grabber features an industry standard PCI Express™ (PCIe) Gen 3.0 expansion bus with a sustained bandwidth of more than 1.7Gb/s that delivers high speed access to the host memory. It's fully compatible with PCIe 2.x, and is Camera Link Rev 2.1 standard compliant.

The Xtium2-CL MX4 offers built-in, robust electrical signals for external event synchronization, and status notification LEDs. One or more boards can be synchronized to capture images from multiple area or line scan cameras simultaneously. The Xtium2-CL MX4 supports one Base, Medium, Full or 80-bit mode with Base/Medium/Full PoCL capabilities, as well as 2 independent base camera link cameras.

The Xtium2-CL MX4 has the same feature set as Xtium-CL MX4 and some additional enhancements. Read these documents if you are using Xtium-CL MX4 frame grabbers and want to move to the new Xtium2-CL MX4 frame grabber, or want use the Xtium2-CL MX4 and Xtium-CL MX4 frame grabbers interchangeably, Converting Xtium-CL-MX4 to Xtium2-CLMX4 frame grabbers, Using Xtium2 CL MX4 and Xtium CL MX4 interchangeably.

Teledyne DALSA's Sapera LT SDK is a free image acquisition and control toolkit for Teledyne DALSA 2D/3D, GigE, Camera Link, Camera Link HS cameras, and frame grabbers.

Datasheet Manual

Xtium-CL MX4 Features

• Half-length PCI Express PCIe 3.0 x4 Board
• Captures images from two Base cameras or one Medium, Full or 80-bit camera
• Camera Link Rev. 2.1 compliant
• Bandwidth of more than 1.7Gb/s
• 512MB of memory onboard
• On board Bayer decoding
• On board flat field correction
• Input LUTs
• Hardware dead pixel replacement
• Supports Camera Link operations up to 85MHz
• Power Over Camera Link
• Extended feature set supports non-Camera Link pixel/tap configurations
• ROHS compliant