TC12K series telecentric lenses are designed to fit very large line detector cameras. An image circle diameter larger than 62 mm combined with the very high resolution featured by this lens family makes TC12K Series the solution of choice for 12 and 16k pixel cameras.

Flat panel display, solar cell and electronic board inspection are among the most common applications of these optics in the electronics industry; at the same time the optical specifications make them perfectly suitable for large mechanical parts accurate measurement.

In addition to the standard M72x0.75 mount, TC12K lenses can be easily equipped with any camera mount at no additional cost ensuring wide compatibility with most common linescan cameras.

Application examples

Flat panel inspection

Large mechanical parts

Electronic board inspection

Detector type Optical specifications Mechanical specifications Datasheet
Get Quote
Part
number
Mag. Image
circle
line-8kpx
8k x 7 µm
57.3
line-16kpx
16k x 3.5 µm
57.3
line-12kpx
12k x 5 µm
61.4
line-12kpx
12k x 5.2 µm
62.4
WD f/# Telecentricity
typical (max)
Distortion
typical (max)
Field
depth
CTF
@50 lp/mm
Mount Length Diam.
(x) (mm) (mm) (mm) (mm) (mm) (deg) (%) (mm) (%) (mm) (mm)
Object field of view (mm x mm) (1) (2) (3) (4) (5) (7) (6)
TC12K 064 0.960 62.4 59.7 59.7 64.0 65.0 162.8 16 < 0.06 (0.08) < 0.08 (0.10) 1 > 35 M72 x 0.75 - FD 6.56 566.7 100
TC12K 080 0.698 62.4 82.2 82.2 88.1 89.5 157.4 16 < 0.06 (0.08) < 0.08 (0.10) 2 > 35 M72 x 0.75 - FD 6.56 541.9 116
TC12K 120 0.529 62.4 108.4 108.4 116.1 117.9 254.0 16 < 0.06 (0.08) < 0.06 (0.08) 4 > 40 M72 x 0.75 - FD 6.56 722.1 180
TC12K 144 0.439 62.4 130.6 130.6 140.0 142.2 237.9 16 < 0.06 (0.08) < 0.07 (0.10) 5.5 > 40 M72 x 0.75 - FD 6.56 743.3 200
TC12K 192 0.320 62.4 179.4 179.4 192.3 195.3 265.5 16 < 0.06 (0.08) < 0.08 (0.10) 10 > 35 M72 x 0.75 - FD 6.56 857.5 260
TC12K 240 0.260 62.4 220.5 220.5 236.3 240.0 492.8 16 < 0.06 (0.08) < 0.08 (0.10) 15.4 > 35 M72 x 0.75 - FD 6.56 1072.8 322

Notes

  1. Working distance: distance between the front lens and the object. Set this distance within +/- 3% of the nominal value for maximum resolution and minimum distortion
  2. Working F-number: the real F-number of a lens when used as a macro. Lenses with smaller apertures can be supplied on request
  3. Maximum slope of principal rays inside the lens: when converted to milliradians, it gives the maximum measurement error for any millimiter of object displacement
  4. Percent deviation of the real image compared to an ideal, undistorted image: typical (average production) values and maximum (guaranteed) values are listed.
  5. At the borders of the field depth the image can be still used for measurement but, to get a very sharp image, only half of the nominal field depth should be considered. Pixel size used for calculation is 4.35 μm.
  6. Measured from the front end of the mechanics to the camera flange.
  7. FD stands for Flange Distance (in mm), defined as the distance from the mounting flange (the “metal ring” in rear part of the lens) to the camera detector plane.
TC12K 064
TC12K 080
TC12K 120
TC12K 144
TC12K 192
TC12K 240

Technical documents

Data table XLS
Product user guide PDF
Telecentric lenses tutorial PDF
OE Bi-Telecentric technology PDF
Back focal length adjustment PDF

Press & marketing content

Telecentric lenses brochure PDF
Opto Engineering 2014 catalog PDF
Telecentric applications PDF
Caps inspection and measurement PDF
Bi-TC tech for accurate measurement PDF

Layout files

TC12K 064
TC12K 080
TC12K 120
TC12K 144
TC12K 192
TC12K 240

Please contact us if you have questions or need more information.

Wide image circle

TC12K is optimized to cover most of the line scan sensor sizes up to 62.4 mm.

Sensor sizes

Phase adjustment

Adjusting the phase of the camera mounted on TC12K telecentric lenses is easy: simply loosen the three set screws and rotate the camera mount until you achieve the desired angular alignment.

TC12K phase adjustment